EASY TIMBER

Pocket doors for frameless sliding doors Line Easy to create visually clear spaces with cutting-edge technology.

1. The Easy pocket door is composed of modular galvanized steel components that can be combined with interlocking.

2. At the joint points of the modules, the steel is triple-thick, forming a strong vertical rib that prevents bending.

3. The mesh panel is secured to the sides with molded and grooved tabs bent over the horizontal wire.

4. The top cover is molded and structured as a single piece and accommodates the self-supporting aluminum pulley guide, which is easily inserted without the need for additional fastenings

5. At the mouth of the pocket door, in the upper spacer, and over the jamb, there are aluminum sheets installed for plaster leveling.

6. The pcoket door is equipped with two sturdy spacers formed by reinforced tubes fixed by a molded plate on the front mask and the jamb.

7.The pulley set is made from self-lubricating polyamide resins, with two ball bearings inserted and protected against dust. Additionally, they are injection-molded in a hot chamber and then turned on a ground cylindrical pin to ensure concentricity. Each pulley set can support up to 120 kg.