Publications Library |
| |
Year 2006
Year 2005
Year 2004
Year 2003
|
|
|
SAHECO PRESENT AT THE CONSTRUMAT 2007
11-06-07 |
Saheco, the company specialising in the design, manufacture and marketing of mechanisms for sliding doors, was this year once again present in Construmat 2007, the International Building Exhibition organised by Fira de Barcelona, held from the 14th to 19th of May, and aimed at architects, engineers, constructors, developers, installers, distributors, importers and students of architecture.
This year the brands Saheco and Boxkel extended their areas to 202 sq. metres with a specially designed stand located on the Gran Via fairground, in Pavilion 4, number 390 Saheco, and 275 Boxkel.
Saheco has over 30 years’ experience in the national market, and 20 internationally. Over the last decade it has undergone spectacular growth, allowing it to evolve in every sense; the company is made up of a team of professionals who are constantly working to identify the needs of the sector and develop new proposals.
In this year’s Construmat, Saheco presented to the market its latest innovations in mechanisms for sliding doors for cupboards, wardrobes and other furniture, dividers and connecting doors, industrial doors and glass doors. In addition, Saheco revealed its new corporate image and the original new design of its two general catalogues, devoted to wood and aluminium and glass structures.
The mechanisms for wooden structures exhibited by Saheco in Construmat were: SINCRO PROGRESIVA, SF-P150, SF-60D, SF-RA60, SF-35 and SF-L60D. In the case of glass structures they were: SV-P150, SV-A101D, SV-A60 and SV-SINCRO. And for aluminium structures: SL-S60 and SL-45.
The most significant innovations presented by Saheco in this year’s Construmat were the following mechanisms: SV-SWING, SV-I120 applied to showers, SV-I45 and SL-18.
SV-SWING is a new system for dividers and glass doors, with a hinged door, both single and double, allowing up to 120 kg of weight to be supported, for glass panes from 10 to 12 mm. It is characterised by a system of stainless steel fittings, with a high quality finish, that means they can be visible and give a touch of design to the installation. The different metal fittings that make up this new Saheco mechanism are adjustable and jointed, and can be combined with each other in a variety of ways. Of particular interest are the rounded profiles and the handles that can be fitted with or without locks. In terms of fitting, the SV-SWING can be both wall-mounted, and mounted on glass.
SV-I120 This is a mechanism for dividers and glass doors with stainless steel fittings, for double or single sliding glass doors of up to 120 kg of weight, for glass panes from 10 to 12 mm, especially indicated for installing showers in bathrooms. The visible stainless steel fittings give the installation a quality and design finish, and can be mounted on walls or on glass. Also worth commenting is that the door can be situated on the corner, or the anchoring can even be from the ceiling. Of particular interest are the rounded stainless steel profiles, as well as the articulated support that allows a wide range of fitting angles.
SV-I45 This is a mechanism for dividers and glass doors with stainless steel fittings, for double or single sliding glass doors of up to 45 kg of weight, for glass panes from 6 to 8 mm, especially indicated for installing showers in bathrooms. The visible stainless steel fittings give the installation a quality and design finish, and can be mounted on walls or on glass. Also worth commenting is that the door can be situated on the corner, or the anchoring can even be from the ceiling. Of particular interest are the rounded stainless steel profiles, as well as the articulated support that allows a wide range of fitting angles.
SL-18 This new mechanism for cupboards, wardrobes and other furniture is fitted with an aluminium profile that can support up to 18 kg of weight. It is adjustable and allows the combining of wooden panels and glass panes. The doors have a minimum separation between them, and the SL-18 system allows them to be installed at various levels, sharing the same guides. The fittings are of nylon and plate metal, to give lightness to the assembly. The wheels are fitted with ball bearings, i.e. there is such a fine contact with the track that the result is practically perfect and almost noise free. The system also has a holding brake fitted.
|
|
|
VISIT AND TRAINING AT SAHECO
08-06-07 |
|
Visit and training session at the Saheco facilities by Mr Igor Patras from Trenwood, and by Messrs. Zdenez Frystacky and Jiri Vaclavik from Ideal Trade. May 2007.
|
|
|
VISIT AND TRAINING IN BUDAPEST
08-06-07 |
|
Visit by Saheco's export department to Mr Igor Patras from Trenwood in Budapest. March 2007.
|
|
|
